
What Should You Measure Before Choosing Long Span Shelving
Cartons of different sizes end up on the same shelves. Small boxes disappear behind large ones, and tall gaps waste room. Long Span Shelving works better when the layout follows the stock people actually pick, not an empty shelf drawing.
Start by measuring the cartons, bins, and loose parts that need a home. Record how many will sit on each level and how workers will reach them. A wide shelf is useful only if its depth, height, and loading match the goods and the picking task.
This guide helps you plan industrial long span shelving around shelf size, load, access, and future stock. It also shows what to share with a manufacturer before choosing a configuration. The final shelf loading must be confirmed for that selected size and arrangement; a general description of long span shelving cannot set the limit for your store.
Quick selection answer: what should you record?
Make a stock and picking list. Record item size, weight, quantity, pick frequency, available floor and aisle space, handling method, and the heaviest combined load on one level.
“Fifty cartons” hides size and picking differences. Give a long span shelving rack manufacturer item counts and a rough room plan so it can propose the level arrangement.
Group stock by how people use it
Group items by picking need. A picking zone holds goods handled in a similar way. Keep fast picks in easy reach and give slow stock a known place.
| Stock Group | Placement Question | Practical Check |
|---|---|---|
| Frequent Parts | Can staff reach each item? | Put active bins within comfortable reach. |
| Small Bins | Are labels visible? | Leave room to remove one bin. |
| Slow Cartons | How often are they moved? | Plan reachable storage and approved access. |
| Bulky Boxes | Can staff remove them? | Check size, handling, and aisle room. |
Count each stock keeping unit (SKU), meaning a distinct item or variant. Long span shelving for spare parts should keep bins identifiable without moving unrelated cartons.
Choose width and depth around real cartons
Size shelves around packed goods and their removal path. Measure carton width, depth, and height, including lids or handles. Arrange sample cartons on the floor as they would sit on a shelf.
Can workers see labels and remove rear items? Deep shelves may hide stock. Avoid overhang and blocked aisles. Ask for width and depth from your sample arrangement.
For warehouse shelving for cartons, open boxes need hand room above and in front.
Understand the load on one shelf level
Add the weights of goods that may share one level. One carton’s weight is not the shelf load. Include the heaviest likely mix of cartons, bins, and parts. A level is one horizontal storage surface.
Show placement: heavy parts at one end differ from evenly spread cartons. Flag narrow contact points. Ask for the approved rating for the proposed size, surface, supports, and level arrangement; do not copy another rack’s rating.
Keep the approved load information with the layout. If light bins become metal parts, request a review first.
Plan access for the people doing the picking
Set levels for the way staff pick. Regular picks should be visible and reachable without climbing shelves or standing on cartons. Keep labels readable from the aisle.
Measure aisle room for cartons, trolleys, and approved access equipment. If upper stock needs a ladder, plan its space. Avoid a hard daily reach.
Have staff try the proposed order with sample goods. Check reach and removal before fixing shelf positions.
Allow for change without assuming unlimited adjustment
Plan for likely changes in stock size. Advance Engineering lists adjustable height and frame and beam choices. Confirm the permitted positions and loads for the selected configuration before changing levels or components.
Reserve a marked place for new SKUs. If seasonal cartons grow taller, record their height early. Any revised arrangement still needs the manufacturer’s loading approval.
When should you consider another rack type?
Choose by goods and handling. A rated long span layout can suit hand picked cartons. Smaller goods may suit slotted angle racks if their approved design fits.
If goods stay on pallets and a forklift places them, consider selective pallet racks. Do not put a full pallet on shelving because it carries an “industrial” label. Confirm the selected design.
Solve common shelf planning problems
Trace problems to stock or picking routes. Check them before fixing the layout.
| Warehouse Problem | Likely Planning Issue | What to Check |
|---|---|---|
| Small parts are hard to find | Bins hide labels or mix SKUs. | Visible labels, bin grouping, and a clear location code. |
| Cartons hang over edges | Shelf depth or orientation does not fit. | Actual packed footprint and removal path. |
| Levels are overloaded | Only single carton weight was considered. | Heaviest combined load and its placement. |
| Picking is slow | Busy items sit too high or behind others. | Pick frequency, reach, aisle, and zone order. |
For example, conveyor travel and rack storage need checks that floor only use may not. Give the metal pallet supplier the route.
Illustrative warehouse example: mixed spares
A stock map separates picking tasks. Imagine sealed cartons, fittings in bins, and bulky repair kits. This is illustrative, not an Advance Engineering customer project.
The team measures goods and combined loads. Fittings get a reachable bin zone; sealed cartons have another area; bulky kits need a clear route. The team sends its map for a rated layout.
Checklist for contacting a manufacturer
Send a stock list and sketch. A long span shelving supplier in Ahmedabad needs:
- Packed width, depth, height, and weight by item group.
- Stock count and heaviest combined load per planned level.
- Picking frequency and whole carton or single part picking.
- Floor area, ceiling height, columns, doors, and obstructions.
- Aisle room for workers, trolleys, and access equipment.
- Photos or layout drawing of the shelving area.
- Likely changes in size, stock mix, or item count.
Mark estimated weights and request approved loading and adjustment details.
Conclusion: select around stock and picking
Choose from measured goods and a workable picking route. Group stock, test fit, record combined loads, and check access. Advance Engineering lists adjustable height and component choices.
Review its Long Span Shelving Rack product page and share your stock list and layout. The manufacturer must confirm shelf loading for the selected configuration before use.
Frequently Asked Questions (FAQs)
Measure packed width, depth, height, and weight of cartons and bins. Record counts and the heaviest combined shelf load. Add floor area, ceiling height, aisle space, and picking method. Photos and a room sketch help show obstructions that measurements alone may miss.
There is no universal limit. Capacity depends on the selected span, depth, surface, supports, and configuration. Give the manufacturer the heaviest combined goods weight and its placement. Use the approved rating for that exact level; a figure from another shelf may not apply.
Yes, if the approved surface and loading suit both. Keep loose parts in suitable bins, with visible labels and room to remove them. Measure the cartons too. Check the combined load of all goods sharing a level; a bin zone is not automatically light.
Start with the deepest packed item and its picking method. A second row may hide rear stock. Try the arrangement on the floor, then check label visibility, front access, overhang, and aisle clearance. Ask which available depth supports that arrangement without making picks awkward.
Do not assume so. Long span shelving is generally planned for hand handled cartons and parts. If stock stays on pallets and a forklift places it, describe that operation to the manufacturer. Ask for an approved pallet storage design instead of putting full pallets on ordinary shelving.
Advance Engineering describes adjustable height, but permitted positions depend on the selected configuration. Before changing a level, check its assembly details and the effect on approved loading. Empty the level first and follow the manufacturer’s instructions; open positions do not by themselves authorize a new layout.
Send item dimensions, counts, weights, and picking frequency. Include the heaviest combined shelf load, floor area, clear height, aisle needs, handling method, and photos or a sketch. Mark uncertain weights as estimates. Ask for a proposed layout and approved loading information for the selected configuration.




















